A network in DN42.
All open nodes can be connected using WireGuard.
Supports multiprotocol BGP sessions over IPv6 and extended next hop over IPv6 on all nodes, and I prefer use them.
I prefer to use ipv6 link-local address for IPv6 BGP sessions, and use only IPv6 address when using MP-BGP and extended next hop over IPv6.
Contact me via Telegram (@BB_PGQM) or e-mail (Query DN42 Whois).
If not specified, my WireGuard's configuration on each node will be:
[Interface] ListenPort = <20000 + last 4 digits of your ASN> # If not behind nat PrivateKey = <My privatekey> PostUp = ip addr add dev %i <My DN42 IPv4 address>/32 peer <Your DN42 IPv4 address>/32 PostUp = ip addr add dev %i <My DN42 IPv6 address>/128 peer <Your DN42 IPv6 address>/128 PostUp = ip addr add dev %i <My DN42 IPv6 link-local address>/64 Table = off MTU = 1420 [Peer] Endpoint = <Your endpoint> # If you provide PublicKey = <Your publickey> AllowedIPs = 172.20.0.0/14, 172.31.0.0/16, 10.0.0.0/8, fd00::/8, fe80::/64
Hostname: (v4.)hkg.dn42.bb-pgqm.com
WireGuard port: 20000 + last 4 digits of your ASN
WireGuard pubkey: jtE83RMoN49bs8TOetxrGdzqywz2BI+uT1qJrGI7GVU=
DN42 IPv4 address: 172.20.56.2
DN42 IPv6 address: fe80::549:3441:0:1 (link-local) and fd00:bb:5bf3:3441::1
Remark: Tencent Cloud, 30 Mbps, 1TB/mo, IPv4 Only
Hostname: (v4/v6.)tyo.dn42.bb-pgqm.com
WireGuard port: 20000 + last 4 digits of your ASN
WireGuard pubkey: 9wF7vXyJ+uBUb3At/SODOkaBSEQSdvpdtCwRL9kiuFc=
DN42 IPv4 address: 172.20.56.4
DN42 IPv6 address: fe80::549:3921:0:1 (link-local) and fd00:bb:5bf3:3921::1
Remark: Vultr, 1 Gbps, 1TB/mo
Hostname: (v4/v6.)las.dn42.bb-pgqm.com
WireGuard port: 20000 + last 4 digits of your ASN
WireGuard pubkey: HOD6OE6gbtfRxmd4q3DJwKni+E5+Qsygb4RscwTUCCk=
DN42 IPv4 address: 172.20.56.5
DN42 IPv6 address: fe80::549:8401:0:1 (link-local) and fd00:bb:5bf3:8401::1
Remark: Buyvm, 1 Gbps
Hostname: (v4/v6.)lux.dn42.bb-pgqm.com
WireGuard port: 20000 + last 4 digits of your ASN
WireGuard pubkey: c5xCv0VV8Tel3YMq7q7FXzambac5sG6wA9rfs+EeXzo=
DN42 IPv4 address: 172.20.56.6
DN42 IPv6 address: fe80::549:4421:0:1 (link-local) and fd00:bb:5bf3:4421::1
Remark: Buyvm, 1 Gbps
Hostname: (Contact me)
WireGuard port: (Contact me)
WireGuard pubkey: PdjQjxnD5W3mezszQy/Blyml+c5lBqdN2zo8WZHsxUs=
DN42 IPv4 address: 172.20.56.1
DN42 IPv6 address: fe80::549:1561:0:1 (link-local) and fd00:bb:5bf3:1561::1
Remark: China Unicom, https://www.speedtest.net/result/13181999484, Dynamic IPv4 and IPv6, Only accept peer from mainland China via IPv6, Clearnet MTU 1492
Hostname: (Contact me)
WireGuard port: 20000 + last 4 digits of your ASN
WireGuard pubkey: y/tmrWa3FbuomFsKAZFuEI45Yyh5aPaDkxLUyQruzWM=
DN42 IPv4 address: 172.20.56.8
DN42 IPv6 address: fe80::549:1563:0:1 (link-local) and fd00:bb:5bf3:1563::1
Remark: China Telecom, Dynamic IPv4 and IPv6, Only accept peer from mainland China via IPv6
The IPv6 address assignment rules for nodes are: fe80::549:<M49_CODE><ID_IN_AREA>:0:1 (link-local) and <MY_PREFIX>:<M49_CODE><ID_IN_AREA>::1
This static page running on Cloudflare Worker.